Devilbiss PROLite E Spray Gun (Pressure Feed)
– Ceramic & Enamel Spray Gun –
Contents
Part No.: PROLT-EC64-22C
PROLT – Spray Gun Series
E – Enhanced Version (Ceramic & Enamel)
C64 – air cap (e.g. C64, C62, etc..)
22 – nozzle size (e.g. 22=2.2 mm)
Technical Specifications
Fluid Nozzle Range: 0.5-2.8 mm
Atomization Technique: Conventional
Gun Weight (with cup): 500 g [xxx oz]
Fluid Supply Connection: 3/8″ Universal*
Air Supply Connection: 1/4″ Universal*
(* fits BSP and NPS standard)
Air Cap Overview
| Air Cap | Part No. | Atomization | Air Consumption | Air Inlet Pressure recommended |
Fan Pattern Size (max.) (mm/inch) |
|---|---|---|---|---|---|
| C62 | PROC-120-C62-K | Conventional | 430 lpm [15.2 cfm] | 3.0 bar [45 psi] | 490mm |
| C64 | PROC-120-C64-K | Conventional | 400 lpm [14.1 cfm] | 3.0 bar [45 psi] | 430 mm |
| C67 | PROC-120-C67-K | Conventional | 425 lpm [15.0 cfm] | 3.0 bar [45 psi] | 500 mm |
Features
The Devilbiss PROLite E is designed for heavy-duty spray finishing and surface coating applications in the ceramic and vitreous enamel markets.
The gun has the same design as the standard PROLite models, but with the following additional features:
- Needle packing: It is equipped with a special abrasion resistant needle packing to withstand the aggressive action of the ceramic coating on the sliding needle shaft.
- Fluid Nozzles/Needles: Available in either stainless steel, nitride hardened or tungsten carbide.
- Increased passageways: Increased diameter fluid passageways (stainless steel) allow fluid flow up to 3.5 liters per minute with heavy ceramic glaze
Applications
Ceramics and vitreous enamels in ceramics and sanitary ware